Pillar Mold Round (Small)

(1 customer review)


In stock

SKU: 01643-1 Category: Tags: , ,


    Pillar Mold  – Round (Small)

    A durable, seamless, aluminum candle mold with a hole for your wick. This mold is excellent quality aluminium and produces a nice pillar candle with easy mould release.

    General Usage Guidelines
    Use with Soy Wax: Phoenix Pillar Blend/All Seasons A27 Palm Wax: Uniwax/Crystal Palm Paraffin Wax: Yes
    Width: 76mm Wall Thickness 1.01mm Height 88mm
    Suggested wick: ACS 6.7 or ACS 7.0 (300mm)

    Condition your mold using a small amount of soybean or vegetable oil. Thread one end of your wick through the hole in the mold and secure it with some putty, be sure to seal the hole around the wick. If using a tabbed wick trim the tab off the other end and pass the wick through a wick holder. Secure the wick tightly using a clip or a peg, check that the wick is running up the centre of the mold. Follow the instructions for the wax you are using and proceed to fill the mold.


    Here's a tipSuggested wick sizes are a recommended starting point only and your own testing is always required to determine the best wick for your candle recipe.

    1 review for Pillar Mold Round (Small)

    1. Mark

      After success with the smallest version I tried this one. It’s just as good. Definitely going to buy a couple more!

    Add a review

    Your email address will not be published. Required fields are marked *