Description
3D Multilateral Diamond Candle MoldThis 3D Multilateral Diamond Mold is easy to use and is perfect for soap or candle making. The silicone mold is soft and easy to use and makes a Diamond faced 3D cube. The molds are easy release and simple to clean. Mold Dimensions: 6cm x 7cm |
Helpful Product Information: |
||
| Material: Silicone | Style: 3D Diamond Cube | |
| Height: 4.5cm | Bar Length: 6.0cm | |
| Bar Width: 7.0cm | Max Temperature: 210ºC | |
Directions:Melt & Pour Soap: Pour melted soap into silicone mold. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Candle: We recommend using Phoenix Pillar Blend or All Seasons A27 Soy Wax. Pour melted soy wax into silicone mold. If you want to thread a wick through the mold put a pin pick in the silicone and then push the wick through. Wrap some blue tack around the outside of the wick to stop it from leaking. Care: |
Debbie Fry –
I have made quite a lot of candles using this mould. It’s so much fun, especially if you use different colours for each layer. Very easy to use and get the candle out. 100% recommended this product