Soap Tray Mold Handmade (Large 16 cav)


In stock

SKU: P9800 Category: Tags: , ,


    Product Description:

    Got a big batch of homemade soap ready to go? The Handmade Soap Mold Tray will make sixteen rectangle soap bars, each with the word “Handmade” stamped across the top with a floral border.

    Helpful Product Information:
    Material: Plastic Style: Tray
    Average Bar Weight: 163g Bar Cavities: 16
    Bar Depth: 102mm Bar Length: 35mm
    Bar Width: 51mm Maximum Temperature: 62ºC

    Melt & Pour Soap: Pour melted soap at a temperature no hotter than 57ºC into mold. Cool until soap has hardened. Remove soap from mold. For easier un-molding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

    Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

    Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 57ºC. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

    Points of Interest:

    Manufacturer: Milky Way Molds
    Material: Clear PVC (Not Approved for Food Contact)
    Country of Origin: United States

    Care Instructions:

    OWL_CandleCreations_FSMilky Way Soap Molds can tolerate temperatures of 135-145 degrees F (57 – 62 C). Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.




    There are no reviews yet.

    Be the first to review “Soap Tray Mold Handmade (Large 16 cav)”

    Your email address will not be published. Required fields are marked *